Howden Electric Heaters vs. Heat Pumps: An Emergency Procurement Comparison

Last December, a food processing plant called me at 7:30 on a Tuesday morning. Their process heating system had failed. They had 48 hours before a scheduled production run worth about $85,000 in revenue.

By Thursday, we had two Howden electric heaters installed and running. Equipment cost landed around $24,000 with expedited freight. The heat pump quote we pulled the same day: six-week lead time, nearly $100,000.

That wasn't even a choice.

Now, that's an extreme case. But over the past five years, I've handled 200+ rush orders for industrial heating equipment—everything from emergency replacements to last-minute capacity additions. The electric heater vs. heat pump question comes up in almost every one.

Here's what I've learned: there's no universal winner. But the differences matter a lot when you're under a deadline, and they matter even more when you're not.

The comparison framework

I'm comparing industrial electric heaters—the kind that run process heating at 150–400°C—against industrial heat pumps of equivalent heating capacity. If you're heating water for washing or space heating, you're looking at a commercial water heater, not process heating equipment. That's a different category with different constraints entirely.

Three dimensions matter most: deployment speed, component availability, and total cost. These are the factors that determine whether you make your deadline or spend the week explaining why the line is still down.

Dimension 1: Deployment speed — who can you get up and running faster?

This is usually the first question, and the answer isn't close.

Electric heaters: Standardized designs, usually in stock at regional distributors or available within 2–5 business days. In the December job I mentioned, we got two units from distributor stock in Ohio and Pennsylvania in under 36 hours. Howden's been making industrial equipment for over 160 years, and the reason we keep them on our short list for emergencies is simple: their regional distribution network tends to have stock when everyone else is on backorder.

Heat pumps: Typically 4–8 weeks lead time for industrial-capacity units. I don't have hard data on average lead times across the entire industry—it varies wildly by manufacturer, capacity, and refrigerant type. But based on the 40 or so quotes I've requested in 2024, the shortest was three weeks for a 400 kW unit. Anything above 1 MW was six weeks minimum.

The reason is structural: heat pumps are engineered systems. Compressors, refrigerant circuits, control boards, and custom enclosures go into every unit. Electric heaters are comparatively simpler to manufacture and easier to stock.

So glad we didn't try to make the heat pump work on that December job. Almost signed a quote for a used unit to save $60,000—would have taken six weeks to arrive and probably three more to commission. We would have missed the production window entirely.

Dimension 2: Component availability and maintenance — what happens after installation?

This is where the comparison gets interesting, because the first month of operation rarely tells the full story.

Electric heaters: Component architecture is simple and largely standardized. Heating elements, contactors, thermocouples, and solenoid valves are available from multiple industrial supply channels. Lead times on replacement parts are measured in days, not weeks.

Heat pumps: More complex. Compressors, reversing valves, electronic expansion valves, and proprietary control boards. Some of these parts are manufacturer-specific, and if your compressor fails, you're looking at 4–6 weeks for a replacement—assuming it's in stock anywhere in the region.

We learned the component lesson the hard way in 2023. Tried to save $340 by sourcing a generic solenoid valve for one of our electric heater units. It failed in six weeks. The resulting downtime cost us $2,200 in lost production—and that's before you count the labor for the emergency repair. Now we only use OEM-specified valves. That $340 savings wasn't even a rounding error on the total project cost.

For systems that need forced-air circulation, you're also dealing with blowers. The Howden blower distributors network is actually pretty robust—most regions have three or four distributors carrying common wear parts and rebuild kits. But that same distribution infrastructure doesn't exist for heat pump compressors. Different supply chain entirely.

One more thing on heat pumps: refrigerant handling. If your maintenance team isn't certified for the refrigerant your unit uses—and regulations have been shifting on this—you're adding another layer of complexity to every service call.

Dimension 3: Total cost — which option actually saves money?

This is the dimension where people expect heat pumps to win. And they do—under certain conditions.

Electric heaters: Lower upfront cost per kW of capacity. Higher operating cost per kWh of heat delivered. For a 600 kW system, you're looking at roughly $15,000–25,000 for the equipment, depending on configuration and controls.

Heat pumps: Higher upfront cost. Lower operating cost when running at design conditions. For equivalent capacity, expect to pay 3–5x the equipment cost of an electric heater. A 600 kW heat pump system might run $80,000–150,000 installed.

The break-even calculation depends almost entirely on run hours. If you're running 4,000+ hours per year, the heat pump's efficiency advantage eventually pays back the upfront premium. If you're running 1,500 hours—seasonal operations, backup duty, or intermittent processes—the payback period stretches past the point where most finance teams lose interest.

To be fair, heat pumps have real disadvantages for industrial use that don't always show up in the marketing materials:

  • Low-temperature performance drops off. Below -5°C ambient, COP can fall to 2 or lower. At that point, you're not saving much versus electric resistance heat.
  • Refrigerant regulations are moving. What's compliant today might require retrofitting in five years. That's a cost most project budgets don't account for.
  • Repairs require specialized technicians. Not every maintenance team can service a refrigerant circuit. If yours can't, you're paying for a service contract or waiting for a technician to drive in from three hours away.
  • Compressor failure is a multi-week event. Electric heater element failure is a same-day fix. That difference shows up in your uptime numbers.
I have mixed feelings about heat pumps for industrial heating. On one hand, they're genuinely more efficient when they're running at design conditions. On the other, I've been burned enough times by heat pump complexity during emergencies that I've become skeptical of them for anything but base-load applications. I've settled on a compromise: heat pumps for continuous duty where the efficiency pays off, electric heaters for backup and intermittent use.

When to choose which

I don't think there's a single right answer here. But based on the 200+ orders I've coordinated, the pattern is pretty clear.

Choose electric heaters when:

  • You need heat in the next two weeks (or the next 48 hours, in some cases)
  • Your operation is intermittent—seasonal, backup, or under 2,500 run hours per year
  • You want a system your in-house maintenance team can service without refrigerant certification
  • You're operating in temperatures below -10°C and can't afford COP degradation

Choose heat pumps when:

  • You have 6–8 weeks for delivery and installation
  • Your process runs 4,000+ hours per year and the efficiency savings justify the upfront premium
  • You have (or are willing to build) a maintenance team trained on refrigerant systems
  • Your energy costs are high enough that the operating cost difference actually moves your P&L

Here's the honest limitation: if you're dealing with an emergency—system down, production halted, deadline Friday—the heat pump isn't a real option. Not because it's a bad technology. Because it's the wrong tool for that timeline.

But if you're planning a new installation or a scheduled replacement, and you have the runway to do it right, the heat pump deserves serious consideration. The efficiency numbers are real. The complexity is also real. Whether the trade-off makes sense depends on your operation—not on which technology sounds better in a sales presentation.

Leave a Reply